Roof Coating in Northridge for Suitable Low-Slope and Metal Roofs
A roof coating is a liquid-applied surface over a suitable existing roof, usually low-slope membrane or metal, that adds a reflective, waterproofing layer. It is not a new roof and it does not fix wet insulation, failed seams, or ponding drainage. The honest coating job starts by checking whether the existing roof qualifies, and says so in writing when it does not.
Service overview
What roof coating in Northridge actually involves
Coating work in Northridge runs in order: the existing surface is cleaned and checked, failed seams and flashing are repaired, wet insulation is excluded or replaced, and the coating is applied in the coverage the product calls for. A reflective coating can also serve as a cool surface, and its measured reflectance and emittance values belong in the quote where a cool claim is made. On a low-slope plane, drainage is checked first, because a coating over a ponding plane fails at the pond. On a pitched shingle field, coating is generally not the right treatment, and that limit is stated rather than sold around. Re-roof work over 100 square feet in Los Angeles generally requires an LADBS permit under LADBS re-roof rules, and the permit fee is confirmed with LADBS for each job. The 2025 Title 24 code took effect 1 January 2026 through Los Angeles Ordinance 188797, and Northridge sits in Title 24 Climate Zone 9.
! Common warning signs
A coating sold over wet insulation
Coating over saturated insulation traps moisture and fails with the layer beneath it. A moisture check precedes any coating quote.
Ponding under a new coating
Standing water breaks coatings down at the pond line. Drainage correction comes before coating, or coating should not be sold.
A shingle field offered a coating
A pitched shingle field is not a coating candidate in the usual case. A coating offered there should be questioned, and the alternative, repair or replacement, discussed instead.
Scope of work
What a coating job includes
Coating is quoted as preparation plus application, with the existing roof's qualification stated in writing first.
-
01
Surface check and moisture test
The existing membrane or metal surface is checked and moisture-tested, so wet sections are excluded or replaced rather than coated over.
-
02
Seam and flashing repair
Failed seams and flashing are repaired before coating, since a coating does not bridge a failed seam on its own.
-
03
Cleaning and preparation
The surface is cleaned so the coating bonds, with debris and loose material removed and the site protected.
-
04
Coating application
The coating is applied at the product's stated coverage, with reflective values recorded in the quote where a cool claim is made.
When coating is the right call
Coating wins when the existing membrane or metal field is sound, seams and flashing are repairable, drainage works, and insulation is dry. It loses when any of those fail, and a coating quote that does not check them is not a quote worth taking. Warranty terms, if any, are as stated in a written job agreement.
Call for a written quoteTools and methods we use on coating jobs
Moisture meter
Tests insulation and deck before coating, so wet sections are not coated over.
Pressure washer and cleaning stock
Cleans the existing surface so the coating bonds rather than peeling.
Roller and spray equipment
Applies coating at the product's stated coverage across the plane.
Seam and flashing stock
Repairs failed seams and flashing before the coating goes on.
Local execution
Coating work in Northridge follows the low-slope stock: multi-unit and small commercial membrane planes, and metal roofs where a reflective surface is wanted. A coating on a mixed property should cover only the planes that qualify, with the pitched shingle field quoted separately as repair or replacement where it needs it.
How roof coating runs in Northridge
- • Northridge
- • Northridge East
- • Lassen
- • Sherwood Forest
What Northridge customers describe
Open 24 hours for Northridge roof coating calls
Call any time about a coating
Dravon Pulse Roofing is open 24 hours every day at 16923 Roscoe Blvd, Northridge, CA 91325. Call (424) 255-3700 about a coating, and the written quote will state whether the existing roof qualifies before any application is scheduled.
How a coating job runs
Call and qualification check
The existing surface, seams, flashing, drainage, and insulation moisture are checked to judge whether coating applies.
Preparation and repair
The surface is cleaned, failed seams and flashing are repaired, and wet sections are handled before coating.
Application and walkthrough
The coating is applied at stated coverage, the finished plane is checked, and the job is walked through with you.
What shapes a coating quote
No price is stated on this page. Coating quotes move with plane size, preparation needed, and product coverage, and the only real number is a written quote after a qualification check. Warranty terms, if any, are as stated in a written job agreement.
Plane size and access
Larger planes and restricted access take longer to clean, prepare, and coat.
Preparation scope
Seam and flashing repair and wet-section handling found during the check are photographed before they are added.
Product and coverage
Different coating products carry different coverage and reflective values, quoted as named options.
Google reviews
Roof coating questions we hear weekly
Is a coating a new roof?
No. A coating is a surface layer over a suitable existing membrane or metal roof. It does not replace wet insulation, failed seams, or a finished field.
Can a shingle roof be coated?
Generally not as a standard treatment. A pitched shingle field that needs help is usually a repair or replacement job, and that alternative should be discussed instead.
Does a coating make a cool roof?
A reflective coating with measured reflectance and emittance values can serve as a cool surface for a suitable roof type. The values belong in the quote where a cool claim is made.
Do coating jobs need a permit?
Re-roof work over 100 square feet in Los Angeles generally requires an LADBS permit under LADBS re-roof rules, and the permit fee is confirmed with LADBS for each job. The 2025 Title 24 code took effect 1 January 2026 through Los Angeles Ordinance 188797, and Northridge sits in Title 24 Climate Zone 9.
Related services
Flat Roofing
Low-slope membrane systems that coatings are most often applied over.
Cool Roofing
Reflective roof options and Climate Zone 9 values.
Metal Roofing
Metal field systems that coatings can suit.
Northridge
Coating work across Northridge.
Lassen
Roofing along the Lassen Street corridor.
Get roof coating in Northridge scheduled
Call Dravon Pulse Roofing at (424) 255-3700 for roof coating in Northridge. Open 24 hours every day at 16923 Roscoe Blvd, Northridge, CA 91325. Warranty terms, if any, are as stated in a written job agreement.